Standard Camo Patterns
Please Note: As mentioned on our camo patterns page the choice of what finish to use depends on the project., Remember that DuraCoat has approximately 1/10th the wear resistance (hardness) of Cerakote.. Since DuraCoat is a 2 part paint process it does come in more colors than Cerakote. You are the ultimate judge on what would be best for your project, but in may cases a combination of the two finishes could be the best choice.
We wanted you to be aware of the relative wear and hardness properties of each material. Most of the colors shown below are available in either finish material. If you have a very specific color requirement you should contact us so we can let you know if it is available in both coating materials. If you plan on using CeraKote, it requires a heat resistant pattern and not all camo patterns shown below are available in a heat resistant pattern.
Shown below are the standard camo patterns available. As with the solid colors you can combine different colors on the same gun. Take a look at our Gun Finish Selector to get an idea of how your color choices might look together. You are not limited to the patterns shown below, the possible color combination's are limited only by your imagination. For example: You could order the Urban camo pattern and use the Woodland camo colors. If you plan on using DuraCote our experience has shown that applying a protective clear coat will greatly enhance your DuraCoat project. The clear coat evens out the surface sheen and it is recommended by the manufacturer.
|For more information on a camoflage coating to your firearm please feel free to email us. Let us know exactly what you are looking for and we can make it happen. Thanks for taking the time to look at our camo salples.|